Stainless Steel Other Grade
Showing all 3 results
-
Stainless Steel, Stainless Steel Other Grade
15-5 PH Stainless Steel Bar – AMS 5659
15-5 stainless steel is a martensitic, precipitation-hardening material with chromium, nickel and copper. It is often a first choice in the aerospace industry for fasteners and structural components. Its unique structure provides increased toughness and better corrosion resistance than its predecessor, 17-4 PH. Both inclusion control and a minimized amount of delta ferrite as compared to 17-4 stainless steel contribute to the greater toughness of 15-5. The alloy is further strengthened by a low temperature heat treatment which precipitates a copper containing phase in the alloy. 15-5 PH is able to meet the stringent mechanical properties required in the aerospace and nuclear industries.
SKU: n/a -
Stainless Steel, Stainless Steel Other Grade
17-4PH Stainless Steel Sheet, Coil and Plate – AMS 5604, UNS S17400
Stainless Steel, Stainless Steel Other Grade17-4PH Stainless Steel Sheet, Coil and Plate – AMS 5604, UNS S17400
17-4 PH is a martensitic, chromium-nickel-copper precipitation-hardening stainless steel. 17-4 PH stainless steel is capable of attaining a wide range of strength and toughness properties depending on the precipitation or aging temperature used in hardening. Its valuable combination of high strength, good corrosion resistance and toughness in both base metals and welds gives designers opportunities to add reliability to their products while simplifying fabrication and often reducing costs. High strength is maintained to approximately 600°F (316°C). This material has good resistance to stress corrosion cracking in the lower strength conditions.
SKU: n/a -
Stainless Steel, Stainless Steel Other Grade
17-7PH Stainless Steel Sheet, Plate & Coil – AMS 5528, UNS S17700
Stainless Steel, Stainless Steel Other Grade17-7PH Stainless Steel Sheet, Plate & Coil – AMS 5528, UNS S17700
17-7 PH is a precipitation-hardened stainless steel that is well suited for aerospace and other applications requiring high strength and good corrosion resistance and formability. Type 17-7PH is a Chromium-Nickel-Aluminum, austenitic stainless steel. It is the most formable of all PH grades and has the highest strength and hardness. It is less magnetic than other PH grades and offers minimal distortion upon heat treatment. This material maintains its valuable properties at temperatures up to 800° F (427° C).
SKU: n/a
