| Thickness | 0-1 mm, 1-2 mm, 2-3 mm, 3-4 mm, 4-5 mm or as per requirement |
| Type | Sheets & Plates |
| Usage/Application | Industrial, Construction, Pharmaceutical Industry |
| Sheet Size | As Per Requirement |
| Certification | ISO |
| Place Of Origin | India |
We are one of the leading manufacturers & suppliers of SS 201 Sheets & Plates.
Chemical Composition
| C | 0.15 |
| Si | 1.00 |
| Mn | 5.50-7.50 |
| P | 0.060 |
| S | 0.030 |
| Cr | 16.0-18.0 |
| Ni | 3.50-5.50 |
| Others | N 0.25 |
Mechanical Properties
| Tensile Strength, min | Yield Strength, min | Elongation |
| 75ksi | 38ksi | 40% |
Equivalent grades
Applications
Stainless steel 304 sheets, stainless steel 304L plates, stainless steel 304 coils in thickness of 0.3mm to 120mm. that have found extensive applications in various industries. We also deal in Nickel and copper alloy, Stainless & Duplex Steel, Carbon & Alloy Steel, are the materials which are used for designing of stainless steel sheet, plate and coil. We offer various grades of stainless steel plates & Stainless Steel Sheets link ss 310 plates, ss 317 sheets & ss 321 plates etc.
Owing to our rich experience and knowledge, we are supplying a wide range of 304 Stainless Steel Flat Bar. These products are supplied in various sizes, dimensions and thicknesses, so as to cater to the various requirements of customers. It is admired in the industry for its durability, abrasion free feature, sturdy construction and corrosion resistance. The 304 Stainless Steel Flat Bar products are used in construction, refineries, general engineering and several other industries. In addition to this, our renowned clients can avail these 304 Stainless Steel Flat Bar products in various sizes and shapes at rock bottom prices.
Stainless steel 310 sheets, stainless steel 310S plates, stainless steel 310 coils in thickness of 0.3mm to 120mm. that have found extensive applications in various industries. We also deal in Nickel and copper alloy, Stainless & Duplex Steel, Carbon & Alloy Steel, are the materials which are used for designing of stainless steel sheet, plate and coil.
15-5 stainless steel is a martensitic, precipitation-hardening material with chromium, nickel and copper. It is often a first choice in the aerospace industry for fasteners and structural components. Its unique structure provides increased toughness and better corrosion resistance than its predecessor, 17-4 PH. Both inclusion control and a minimized amount of delta ferrite as compared to 17-4 stainless steel contribute to the greater toughness of 15-5. The alloy is further strengthened by a low temperature heat treatment which precipitates a copper containing phase in the alloy. 15-5 PH is able to meet the stringent mechanical properties required in the aerospace and nuclear industries.
